1 / 5
Smash Your Stress Away with the Angry Anti-Stress Enter Key! — image 1
1 / 5

Smash Your Stress Away with the Angry Anti-Stress Enter Key!

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Unleash your frustration without breaking your keyboard! The Angry Anti-Stress Enter Key is your best new friend!

Rating
0 / 5
Likes
12
Downloads
29
Makes
0
Views
863
Reviews
0

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution — Share Alike

Feeling the pressure of tight deadlines or dealing with infuriating emails? The Angry Anti-Stress Enter Key is here to save the day! This robust, oversized button is designed to withstand your most aggressive typing moments. Simply plug it into your computer, and every punch or smash sends an Enter key command, letting you vent your anger productively.

Whether you’re composing an angry email, finalizing a frustrating report, or just need a physical outlet for your stress, this device is perfect. Never worry about breaking your keyboard again – with the Angry Anti-Stress Enter Key, you can let it all out and keep working efficiently.

Smash your stress away and maintain your productivity with this fun and functional gadget. It's not just an Enter key; it's your new stress-busting companion!

 

What you will need

  • Arduino Leonardo microcontroller board. It cannot be any other such as the UNO as those do not support a HUD interface to emulate a keyboard.
  • Tiny Premium Breadboard (https://www.adafruit.com/product/65)
  • 10K ohm resistor
  • 6*6*7 momentary tactile push button
  • 3 short breadboard jumper wires
  • 4x M3x5 screws

How to print

There is a single material version and a version for MMU's that will print the text in color.

How to wire

Use the wiring diagrams at https://docs.arduino.cc/built-in-examples/usb/KeyboardMessage/ to wire up your Arduino Leonardo (displayed is the UNO, but the pins are the same). However, be sure to place the push button at the exact location as shown in the pictures posted here, so it aligns centrally within the case.

How to program

Upload the attached .ino file using the Arduino programmer and you should be good to go.

How to assemble

Place the ButtonPressor in between the actual momentary switch and the smash button. You don't need glue. Attached is the Fusion file if you need to make any adjustments to the ButtonPressor or the board holder. 

Tags