Prusa XL series: Linear (Pressure) Advance Calibration Pyramid
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A Pyramid with different K Values to calibrate Linear Advance on the Prusa XL (IMPORTANT= with a 0,4mm Nozzle )
- Rating
- 3 / 5
- Likes
- 63
- Downloads
- 304
- Makes
- 3
- Views
- 2,534
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution
ERROR in V2 Code ! Sorry!
This was fixed in V3
In a recent post, Prusa introduced the K Values in the G-code of the Filament Settings, and since i had trouble with Multicolored print having a nice bond between the edges of the colors, i thought it would be a good step to begin with a few Calibration of the mentioned Linear Advanced Value.
This test is to find the correct Linear Advance setting with a 0,4mm Nozzle. The K-Values are tested between 0,005 and 0,110.
This test and cant be transfered to other Nozzle sizes.
For other Nozzles different K-Value Ranges are needed.
After printing the Gcode, you need to get the best Value (or one in between), and insert it in the Filament used!
IMPORTANT!!! The correct Value need to be changed HERE for EACH Filament you use!
Make make sure that you calibrate youre Temperature and Extrusion Multiplier before you run this test, to make sure you have the best possible and clear results. Also to check the results, a reflective filament as silver is helpfull.
Steps:
- Calibrate Filament Temperature
- Calibrate extrusion Multiplier
- Open the project file (3mf), and select your calibrated filament .
- Generate gcode
- Select the best K-value and replace it with the original (0.05) value in the slicer settings (Filament Settings/Custom G-Code) like mentioned in the picture
- Happy calibrated printing
Pyramid was printed with sponsored 3D Printiverse PLA Filament.
You can find it here: https://3d-printiverse.com/
This is a start of different Test Files that im planning to upload!
Tip me on KO-FI by klicking here:
https://ko-fi.com/surfalex2000
Check out my other optimized XL Parts! There is a Series to come!
You can find them in my Collection:
https://www.printables.com/@Surfalex2000/collections/830114