Worx Landroid M Garage Mk2
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Handy garage for the Landroid M mowing robot. Should easily fit other models and makes.
- Rating
- 5 / 5
- Likes
- 105
- Downloads
- 1,066
- Makes
- 9
- Views
- 5,194
- Reviews
- 7
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution
Handy UV and elements cover for your landroid mowing robot. May be easily adapted to different mowers.
This is update Mk2. I made it 2cm higher after observing a couple of collisions.
Option with ridiculous Cyberpunk vibe provided as well.
To assemble you will need following parts:
- 2 x M4 30mm bolt
- 2 x M4 nuts
- 4mm policarbonate panel 45.5cm x 46cm
- 2 x policarbonate rim
I used two M4 nylock nuts, but basic nuts should work as well. Both arms are fixed to the original frame and secured to the ground with a plastic through - bolt that comes with the mower.
Arms are split to make it possible to print on Prusa bed. Sections form a secure jigsaw snap-fit connection.
Polycarbonate panels with rims can be purchased at the hardware store. Here is an example: https://www.castorama.pl/plyta-poliweglan-komorowy-palram-brazowa-0-98-x-2-m-4-mm-1-96-m2/5908227329179_CAPL.prd