Harbor Freight Storage Case brackets for Home Depot drawer slides
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These brackets hold Harbor Freight medium storage case to Home Depot drawer slides.
- Rating
- 0 / 5
- Likes
- 36
- Downloads
- 72
- Makes
- 0
- Views
- 1,113
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution
These brackets allow Harbor Freight media storage cases to sit on drawer slides. The cases can be opened when slide out all the way. The cases can also be removed to take to your workspace. I believe these brackets will work with most drawer slides.
Mirror both brackets to have a set for each side. I provided a 3mf with 3 pairs of brackets.
The bottom slide should be 1/8" away from the bottom board. All 4 sides are the same size boards for 6 cases. You might be able to save some height but spacing the slides 2 ½" apart instead of 2 ¾". However, Harbor Freight's case quality is inconsistent. I needed to add a little more space. I used #6 x 3/8" sheet metal screws to attach the brackets to the drawer slides.
Dimensions are on a picture in the gallery. If I made the case again I would use a higher quality ¾" plywood. Keep the internal dimension the same.
Remixed from
I based the design on these two models. These are designed for drawer slides on Amazon that have a third hole pattern at the rear of the drawer slides. Home Depot slides only have the front and middle hole patterns.
https://www.printables.com/model/246638-the-ultimate-harbor-freight-sortimo-rack-cabinet
https://www.printables.com/model/423684-drawer-slide-mounts-for-harbor-freight-parts-stora