Texas Star Nerf Target Stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A stand for @Rem_84927's Texas Star Target
- Rating
- 5 / 5
- Likes
- 40
- Downloads
- 194
- Makes
- 3
- Views
- 1,278
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a stand for @Rem_84927's Texas Star Nerf Target (WIP) so you can place it wherever you'd like. The target has a tendency to fall over or shift if it's not secured in some way, so I'd recommend adding some internal weights or taping it down. Additionally the star needs to be offset from the arm so that the targets can be shot off without getting stuck on the arm. I find stacking 4/5 washers separates it far enough to do this 90% of the time, but adding a longer bolt would allow you to add more. I've also included .Step files so people can tweak the design how they like. This thing has been a hit at every event I've brought it to, and I hope this addition will allow more people to enjoy it as well!
~Nathani, Ennes Arms
Hardware:
2x m8x40 bolts (I recommend a slightly longer one for the bearing axle)
2x m8 nuts
Several #8 washers (to add space between the star and the stand)
Printing: (Orientations shown)
Supports: Not Needed.
Infill & Perimeters: 3 Perimeters should be enough, I keep infill to 20% gyroid (probably overkill)
Orientation:
Arm: On its side. Won't fit on a Prusa Mini, but you can shorten it to fit.
Base: Self explanatory (I hope). Will fit on the mini. 