Booster DoobleTapp Shroud
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a shroud for a goofy variation on the Booster nerf blaster by ShoelessHistorian
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 13
- Makes
- 0
- Views
- 136
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
So this ridiculous thing is a result of me deciding to slap tandem RSCB units onto the Booster.(by ShoelessHistorian) It felt a bit flimsy having two exposed pieces of brass sticking off the front of the thing, so I made this. It features heat set inserts, replaceable muzzles, and helical fluting that's essential to proper function.
The models should be exported in the proper orientation with the exception of the RSCBbody.
The RSCBbody must be printed twice, once mirrored.
Hardware needed:
2x M4 inserts and screws for the RSCB bodies.
2x M3 inserts and screws for the front of the shroud. These are to secure the muzzle.