1 / 6
RatRig Vcore - shelf (300) with cpap, DS18B20 and various add-ons
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Back plate for ratrig vcore 300 with slot for cpap and various add-ons
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 25
- Makes
- 0
- Views
- 462
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is the back plate I've been using for a year now on my ratrig vcore 3.1 300.
- Some visible holes are not completely drilled to optimize the rendering when printing the first layer.
- It is designed to accommodate the cpap cage (remix).
- A slot is provided (between the CPAP and the left motor) for a DS18B20 temperature sensor.
- (opt) The space is a little tight, but there are several slots on the underside to accommodate M3 inserts for attaching a Raspberry, ESP or similar.
- The central cover is separate so you can customize it as you wish. There's plenty of room for a 22mm flexible tube, USB cable or piano wire.
- The ventilation cover is solid, so all you need to do is print the central part of the 3mf file without the bottom/top and the filling pattern you want.
----------------------------------
C'est la plaque arrière que j'utilise depuis maintenant un an sur ma ratrig vcore 3.1 300.
- Certains trous visibles ne sont pas percées completement afin d'optimiser le rendu lors de l'impression de la première couche.
- Elle est prévue pour y insérer la cage du cpap (remix).
- Un emplacement est prévu (entre le CPAP et le moteur gauche) pour y faire sortir une sonde de température DS18B20.
- (opt) L'espace est un peu sérré mais il y à plusieurs emplacements sur le desous pour y loger des inserts M3 afin de pouvoir attacher un Raspberry, ESP ou autre.
- Le cache central est dissocié afin de pouvoir le customiser comme bon vous semble. De basse il y a de quoi y faire passer un tuyau flexible de 22mm, cable USB, corde à piano.
- Le cache de ventilation est plein, il faut simplement imprimer la partie centrale du fichier 3mf sans bottom/top et le motif de remplissage que vous souhaitez.
-------------------------------
BOM :
- Plate : Top side 3xM6x12 (+ 3 T-Nut), Back/bottom side (electronics) 3 Countersink Screw M6x~8-10mm (+ 3 T-Nut).
(You need at least one Countersink Screw out of the three to avoid blocking the cpap case, the other 2 are just "aesthetics") - CPAP : 4xM3 for mounting the cpap box (for M3 screw lenght holes are drilled along the entire length so what you have)
(The rest of the remix of the cpap case has the same screws as the original.) - (opt) inserts on bottom are "classic" M3xD4.6xL4.0