Tenlog Screen Replacement Bin
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replace the screen in your Tenlog printer with a little drawer bin
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 16
- Makes
- 0
- Views
- 133
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
We use Tenlog printers at work and after we switched to Klipper the screen is essentially useless as it doesn't work with TFT screens. So instead of having some arbitrary screen information I swapped it out with a little bin so I can put tools into. Dovetails so that there isn't as much slack in the movement and when it's fully inserted. There are mounting holes in the face plate so it can screw in and be secure to the printer.
The bin has 145mmx75mmx18mm internal volume space which can be made longer or shorter but the height and width are constrained.
I printed with PLA+ using organic supports for the bin. The bin took about 5 hours and the face plate about 2 hours
The angle is 33.5 degrees for anyone's information if they wanted to make something similar.