1 / 2
Mini Catamaran Sailboat (with easy to print infill "string" sail)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Please see print instructions to obtain the result pictured!
- Rating
- 5 / 5
- Likes
- 6
- Downloads
- 47
- Makes
- 1
- Views
- 306
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial
Although it may look similar, this isn't string art like you'll find by 3DPrintBunny (and nowhere near as sophisticated). What you're looking at is actually just infill (PrusaSlicer generated to my specifications). The tricky parts are already in the 3MF but there are still additional settings that need tweaking before you can hit print:
Print Instructions (mandatory/MUST DO):
- layers and perimeters: set layer height to 0.3
- layers and perimeters: set 0 top, 0 bottom layers
- Infill: length of infill anchor: 0
- Infill: maximum length of infill anchor: 0 (not anchored)
Print instructions (Recommended/may need calibration):
- Infill speed: 30mm/s
- Advanced: extrusion width: infill: 0.8mm
- Printer settings: extruder: check retract on layer change
Troubleshooting and potential fixes (printing sail)
- infill strings break before reaching endpoint: infill speed too high
- infill fails to anchor at the start: retraction too fast or too large
- infill droops: filament temperature too high, fan too low, or speed too slow
- nozzle destroys strings after printing: z lift not enabled or too low