Rimac Nevera "Filament Painting"
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€2.99 – €3.65 net (excluding VAT)
For file: Rimac Nevera_0.4n_0.08mm_PLA_MK4IS_3h29m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €3.32 excluding VAT (range midpoint).
- Weight reported by the author
- 38 g
- Print time reported by the author
- 3.49 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Filament Painting Created with HueForge.
- Rating
- 5 / 5
- Likes
- 5
- Downloads
- 14
- Makes
- 1
- Views
- 153
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA Aurapol Black
PLA Aurapol Red
PLA Aurapol Yellow
PLA Aurapol Gray
PLA Aurapol Black Gray
PLA Aurapol White
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Red
At layer #14 (1.2mm) swap to Yellow
At layer #18 (1.52mm) swap Gray
At layer #21 (1.76mm) swap to Black Gray
At layer #28 (2.32mm) swap to White for the rest.