ETC #Lighthack Enclosure - UPDATED
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Updated! I found that both Cora & Prusa Slicers were creating artifacts for the lid stand offs when I went to print a…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 14
- Makes
- 0
- Views
- 122
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial
Updated! I found that both Cora & Prusa Slicers were creating artifacts for the lid stand offs when I went to print a set for a friend recently. This update fixes that. I have also broken out each individual part as requested in the old listing. Enjoy!
From Older Post:
This is a standard enclosure for the ETC #Lighthack. I came up with this a few years ago when it first came out because I didn't want to drill out and file down the edges for everything.
https://community.etcconnect.com/etclabs/f/lighthack/23742/what-is-lighthack
I've had a few friends ask for this file so I thought I would share with everyone else out there.
Enjoy!
Print Settings
Printer Brand:
Prusa
Printer:
Prusa MK4
Rafts:
No
Supports:
Yes
Resolution:
0.20mm
Infill:
15%
Filament: Hatchbox PLA
Black
Notes:
8 - Pan Head #4 x 1/4" Screws for Arduino Board & Display Board Install.
4 - Flat Head #4 x 5/8" Screws for the case enclosure.
File Created in Vectorworks
Sliced in PrusaSlicer 2.7.4 using Hatchbox PLA defaults with supports.
Please like and add a make! Thanks!