ETC #Lighthack Enclosure
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a standard enclosure for the ETC #Lighthack. I came up with this a few years ago when it first came out…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 25
- Makes
- 0
- Views
- 171
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial
This is a standard enclosure for the ETC #Lighthack. I came up with this a few years ago when it first came out because I didn't want to drill out and file down the edges for everything.
https://community.etcconnect.com/etclabs/f/lighthack/23742/what-is-lighthack
I've had a few friends ask for this file so I thought I would share with everyone else out there.
Enjoy!
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
200
Infill:
20
Filament: Hatchbox PLA
Black
Notes:
8 - Pan Head #4 x 1/4" Screws for Arduino Board & Display Board Install.
4 - Flat Head #4 x 5/8" Screws for the case enclosure.
Sliced with Cura using Standard Quality setting printing at 200C and Bed at 60C.
Please like and add a make! Thanks!