Astrocam Arrowhead and other Thumbdrive Camera nose cones
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
If you have a flash drive camera or the news Estes Astrocam, here are a few nose cone options for you. You'll want a…
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 80
- Makes
- 0
- Views
- 808
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
If you have a flash drive camera or the news Estes Astrocam, here are a few nose cone options for you.
You'll want a small rubber band or tape to fully secure the camera.
For the Thumb drive camera, search Ebay for Thumb or Flash drive cameras.
Note: The Micro Camroc uses the Flash Drive Camera. They're not great cameras but boy are they cheap!
The BT-5, 20, 40 and 50 will hold the new Estes Astrocam and tilt it at a better recording view angle. Nose cones have a U-tube for attaching the shock cord.
The BT-60 rings fit between the nose cone and the body tube. You should tape them to the nose cone
BT-55 Astrocam has a opening at the top and bottom that would allow you to thread a shroud line through it so you can suspend it looking down by the parachute.
I suggest using supports to print the overhang areas of the nose cone. I've included the 3MF project file incase you want to use that.
And if you have TWO Astrocams - this nose cone if for YOU!
The BT-50 version of the Arrowhead
The sides are flatten for launch rod clearance, and it gives it even more of an Arrowhead look.
The Filler piece is optional and printed separately to allow for an optional color and adds a cool look. I probably will try flying without it to see if the Arrowhead whistles.
Category: Hobby