Paint pyramid - Remix
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Difference from original: Triangle holes to increase printing quality; Bevel edges; Better stacking; Eyelets modified;…
- Rating
- 4.867 / 5
- Likes
- 298
- Downloads
- 1,186
- Makes
- 14
- Views
- 4,191
- Reviews
- 15
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Share Alike
12/02/2024: Modified version added: wall width slightly increased and pyramids can be connected.
Last photo -- side by side comparison with original (used the same printer, the same filament and the same settings). Round holes of original print were deburred (mine is with no post-printing modifications).
I printed it on Elegoo Neptune 4 in PLA and PETG (on photos black -- PLA, grey -- PETG) using the following settings:
Walls: 4
Supports: No
Layer height: 0.2mm
You may use brim for better adhesion (I printed without brim).