Larger Worx Landroid blade holders - various sizes
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Larger blade holder disks for Landroid Worx mowers, 150mm, 165mm 175mm and 185mm.
- Rating
- 5 / 5
- Likes
- 7
- Downloads
- 107
- Makes
- 5
- Views
- 592
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- GNU General Public License v3.0
Disclaimer
This modification requires the removal of the safety features of the mower. It is dangerous to do and doing that is at your own risk and understanding that you can get cut by the blade with the grid removed. It is not recommended to make this modification if pets or children get near the working mower.
If you still choose to proceed, do remove the battery before working with the mower. You have been warned, the responsibility is on you.
Disk Info
See the various makes for more https://www.printables.com/model/900227-larger-worx-landroid-blade-holders-various-sizes/comments
The best design and blade fit is the 175/185mm disks. For the 150 and 165mm you need to also print the washers for blade centring.
- Standard disk - 150mm x 3 blades
- Standard disk - 150mm x 5 blades
- Larger disk - 165mm x 3 blades
- Larger disk - 165mm x 5 blades
- XLarger disk - 175mm x 3 blades
- XXLarger disk - 185mm x 3 blades
Above 165 mm disks requires removal of the metal grid to fit.
Parts needed
- 3/5 x M3 Heat inserts
Print recommendations
- 5 walls
- 5 bottom layers
- 5 top layers
- 25% infill
Warning: The 185mm disk has less than 5mm clearance to the edge. Use with extreme caution.