Tornado Tube
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I found that a few of the other designs were difficult to hold onto while wet, so adjusting if there was a spill…
- Rating
- 0 / 5
- Likes
- 26
- Downloads
- 535
- Makes
- 0
- Views
- 1,891
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other 3D Objects for Learning
- License
- Creative Commons — Attribution
I found that a few of the other designs were difficult to hold onto while wet, so adjusting if there was a spill became a pain.
I designed mine with some grip and a center funnel down to 15mm that doesn't require supports on a decently tuned printer.
The threads are solid but not perfect, nor is the seal against the funnel, but 2 wraps of teflon tape hasn't leaked in a week of daily use by my son.
I have also found that using a standard set of pliers on the extended setting to grab the neck of the bottle helped get a snug fit, but it's 3D printed, so just snug or you might crack it.
Print Settings
Printer Brand:
Creality
Printer:
CR10S PRO
No
Supports:
No
.2mm
Infill:
85%+
Filament:
Hatchbox ABS, but I don't think PLA or PETG would do bad Black
Notes:
I used adaptive layers in Cura and it worked great, but a .2 height worked as well.
Category: Learning