Kylo Ren with Red Lightsaber
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Kylo Ren with Red Lightsaber
- Rating
- 5 / 5
- Likes
- 17
- Downloads
- 52
- Makes
- 2
- Views
- 268
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Standard Digital File License
For *exclusive* FREE models (including the Darth Vader pictured below) visit my Patreon in bio or http://patreon.com/JustBe3D also if you are interested in members only models, or a commercial license to sell your physical prints of my models.
Can be rescaled just remember not to change the Z axis
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA Kingroon Black Transmission Distance: 0.4
PLA Overture Space Gray Transmission Distance: 1.4
PLA Overture White Transmission Distance: 4
PLA Overture Red Transmission Distance: 8.2
Swap Instructions:
Start with Black
At layer #13 (1.12mm) swap to Space Gray
At layer #15 (1.28mm) swap to White
At layer #17 (1.44mm) swap to Black
At layer #19 (1.6mm) swap to Red
At layer #27 (2.24mm) swap to White for the rest.