1 / 3
Bumpers/ears for FT991A
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Protective Bumpers for FT991A. Needs four (4) 4mm x 20mm flat head screws. I used hex, but whatever floats your boat.
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 217
- Makes
- 0
- Views
- 834
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Share Alike
Pretty much self-explanatory. Attach to the side of a Yaesu FT991 to protect the knobs and rear panel connectors and give the radio a more solid footing.
Uses four (4) 4mm x 20mm flat head screws. If you have a large enough printer, print Parts 1 & 2. If not, print Split parts 1 thru 4 and four (4) dowels. Dowels should fit snugly if your printer is tuned, but may be uniformly scaled up or down by a percent or 2 to adjust for tolerance.
No supports needed. Maximum dimension 305mm.