1 / 7
Print-in-Place Large Simple Hinges 3"x1.25" (no supports needed) — image 1
1 / 7

Print-in-Place Large Simple Hinges 3"x1.25" (no supports needed)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Larger projects need larger hinges. These print in place hinges are ready to go with no assembly required.

Rating
4.833 / 5
Likes
279
Downloads
802
Makes
6
Views
2,035
Reviews
6

Updated at source:

Model information

License
Creative Commons — Attribution

Each hinge is made up of two parts in a single STL file and will work right off the print bed.  DO NOT USE SUPPORTS as they aren't needed and will likely cause the hinges to not work.

The hinges are provided with and without countersunk holes.

The dimensions of the hinges are:

  • 3" x 1.25" - 3 holes per side (0.265" dia - up to ¼" screw)

Hinge size is length of the hinge x length of one of the leaves from the center of the hinge, so the 3"x1.25" measures 3" x 2.5" on the print bed.

The tolerance for the operable print-in-place hinges is 0.01".  The hinges have slightly over 270 degrees range of motion.

For other print-in-place hinge sizes, check out my collection: EcoDad's Print-in-place Hinges Collection.

Printing Recommendations

For strength, I recommend using at least 3 vertical walls and at least 20-25% gyroid infill.

Tags