WCP-0169 SWERVE BODY SHEILD
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€20.24 – €24.74 net (excluding VAT)
For file: CE3E3V2_WCP-0169_Grease_Sleeve_halves_ver_2.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €22.49 excluding VAT (range midpoint).
- Weight reported by the author
- 250 g
- Print time reported by the author
- 24 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is a body surround (grease sheild) for a West Coast Products, 2nd generation (before the X drive), swerve module…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 22
- Makes
- 1
- Views
- 168
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Engineering
- License
- Creative Commons — Attribution — Share Alike
This is a body surround (grease sheild) for a West Coast Products, 2nd generation (before the X drive), swerve module (part number WCP-0169). It is a 2-part surround designed to be snapped onto an already-assembled swerve module, snapping onto the vertical mount pillars and held together by two zip-tie buckles. Note that this was designed assuming the body rails are NOT installed above the base flange.
The files include the STL files for both halves as well as a CURA sliced file (for Ender 3 V2) that I used to print. The STEP file of the assembled part (from Inventor) is also included.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
Yes
Supports:
Yes
Resolution:
standard quality - 0.2mm
Infill:
20% cubic
Category: Engineering