1 / 1
Sebo Dart suction control adapter — image 1

Sebo Dart suction control adapter

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This adapter fits between the Dart's housing and the hose, allowing you to open or close an airgap to limit suction.

Rating
0 / 5
Likes
1
Downloads
26
Makes
0
Views
326
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Hey, if this model helped you in some way, would you mind encouraging me with a few bucks?  - https://ko-fi.com/agent86ix - thanks!

I recently purchased a Sebo Dart vacuum.  It's a great unit, but I found it really hard to push on our carpet.  After making a few other adjustments (ie, adjusting the height setting to the max and purchasing a soft roller), it was still too hard to push.  

Looking at other solutions and other vacuum cleaners, I determined that the problem was too much suction - the vacuum is creating too good a seal against the carpet, increasing the force required to push it.  

Higher end vacuums have a “suction control” that allows you to adjust the amount of suction to the specific flooring type you have, but the Dart lacks this.  It occurred to me that I could improvise a “simple” suction control by introducing a valve into the suction path.  

This model is the result of that experiment.  It clicks into the body of the vacuum and the hose clicks into it.  The adjustable sleeve clicks on the outside of the model, and rotating it allows you to select how much “suction control” you want.  If the window is fully closed, you will get maximum suction to the head.  If it is fully open, you will be able to push the vacuum on plush carpet with less force.

I put a piece of tape on the inside of the sleeve to give it a bit more friction when turning, but I didn't find there to be any issues with the sleeve staying in place.

I printed this on a Bambu Labs X1C in PLA with mostly default settings.  Vacuums can sometimes get quite hot, so you might consider PETG if it starts to deform.

Installation is easy:

  1. Open the bag access hatch on the Dart
  2. Unhook the hose using the release inside the bag access hatch
  3. Close the bag access hatch
  4. Insert the narrow end of the suction control adapter into the hose's hole
  5. Insert the hose into the end of the suction control adapter

To remove, just pull the hose out of the suction control adapter, and use the same release inside the bag hatch to remove the suction control adapter.  

Tags