Minisforum MS-01 MS-A2 MS-R1 Dual Rack Mount 2U
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A rack mounting solution for the Minisforum MS-01, MS-A2, or MS-R1 Mini PC.
- Rating
- 5 / 5
- Likes
- 52
- Downloads
- 604
- Makes
- 5
- Views
- 5,642
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
Minisforum MS-01 MS-A2 MS-R1 Dual Rack Mount 2U
This should also work for the MS-A1, thought the dimensions are slightly small in width and depth, but the height is the same, so it should hold them snug, you'll just have a few mm gap to each side which should be hidden by the front retaining lip anyways.
Here are the factory sizes of each model for reference -
MS-01: 196×189×48mm
MS-A2: 196×189×48mm
MS-R1: 196×189×48mm
MS-A1: 189.5x186x48mm
Connect the 2 sides with M3 screws and secure the MS-01 with a screw in the back slots. I took some ideas from variations I saw online but couldn't find a dual mounting solution that didn't block the air holes on the MS-01.
Left/Right is as though looking from the front of the rack.
***v3 files added***
I've increased the size of the connection between the 2 and made it four M3 screws to secure them together better and increased the size of the of the mounting holes to accommodate M6 rack screws due to some feedback/concerns on another forum.
***v3 files added***