1 / 3
Vase Mode Phone Stand - 30 minutes
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Minimalist phone stand for your desk. Print using vase mode in just 30 minutes and 20 grams of material.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 75
- Makes
- 0
- Views
- 291
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Minimalist phone stand for your desk. Print using vase mode in just 30 minutes and 20 grams of material. Compatible with larger phones and cases. Avoids obstructing bottom-center of screen for gestures. Phone not included.
Print settings
- material: PLA
- layer height: 0.35mm (PrusaSlicer: FAST preset)
- spiral vase: on
- external perimeter extrusion width: 1.0mm (PrusaSlicer: Print Settings -> Advanced)
Tips
- Model should be printed in the default orientation (on its side).
- Increase extrusion width to increase rigidity. In my testing, 0.6mm is a bit flimsy, 0.8mm is acceptable, and 1.0mm is good. My printer/nozzle can go up to 1.2mm, but I saw minor print quality issues at that setting.