G17/19 Magazine Holster (9mm Parabellum Mags)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Easy to use magazine holder/holster for G17/19 Magazines.
- Rating
- 5 / 5
- Likes
- 22
- Downloads
- 279
- Makes
- 1
- Views
- 1,093
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution
Description
Easy to use G17/19 magazine Holster. The feed funnel (see pictures) is slightly bigger than the actual magazine making it easy to feed the magazine. The magazine clip grabs the magazine so it doesn't wiggle around or fall out while running or jumping. The belt ring is designed to accommodates for belts with a maximum width of 4cm and a maximum thickness of 5 mm. Because this is not clipped over your pants it wont rub against your legs so its more comfortable to carry. Because this Holster can carry only one mag you can print and carry exactly as much mags as you want without having an extra slot you don't want.
Information
This works for G17/19 mags from 4th Gen. It does not mean it doesn't work for newer Gen 5 mags, i just didn't test that. It also may work with different calibers like the 22 Lr. Mags but like i said… i didn't test those. (most of G mags will be the same dimensions)
Materials
PLA (standard) [tested]
PETG (standard) [tested] recommended… much better print quality as well as UV resistance
Printing
I strongly recommend supports everywhere.
If you have trouble removing the supports between the Magazine clip and the Holder itself you can carefully break the supports by bending the clip. You DON'T need to remove these supports! (you wont see them anyway)
Happy Printing
