Lamp #50 - Cityscape Puck Lamp
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A free-form cubic frame lamp. Old factory style, abstract Cityscape.
- Rating
- 0 / 5
- Likes
- 37
- Downloads
- 119
- Makes
- 0
- Views
- 1,189
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial
A free-form abstract Cityscape lamp.
Shade: 150 mm height x 110 mm Width
Lamp: 180 mm x 130mm width
This lamp uses a 5V Puck Led, currently a 5W - Warm White, and the one used here, see link below, uses a standard USB connector.
The base is sized exactly for this puck and there is also a snap lid which can be used to keep it in place if needed.
The base is printed using a PETG as the Led can get warm, measured with a laser and it never actually got above 47C (120 F) and the melting point on PLA is ~150 F (65 C) , but just playing it safe.
The shade is printed using a PLA.
Use supports for the City scape shade wall. from baseplate only, to support the wall upper regions. I used manual tree supports and provided a picture or two of where I put them.
The puck led used here:
(The example used a 5W, 2700K, Warm White, I ordered a 3W to try, when it arrives)
https://www.aliexpress.com/item/1005006425667037.html?
The slicer settings for the shade base and snap lid
.20 mm Standard
(All standard settings and speeds, Aligned seam settings)
Filament: Eryone Standard PETG
The slicer settings for The Shade:
Supports required. I used tree manual from build plate only on a P1P.
Filament: Sunlu PLA+ White
.20 mm Standard Quality
Infill % - 35 , Gyroid
Wall Loops - 6
Seam Position- Aligned