1 / 5
Belt Pouch for Glasses 2.0
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Improved Belt Pouch Design for Glasses. No Supports needed. Adjustable magnetic clasp.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 20
- Makes
- 0
- Views
- 313
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A Glasses Box for the belt with a magnetic clasp. It's meant for Glasses size with 3,1 cm X 3,5 cm X 12 cm.
Additional you need:
- A Magnet with a diameter of 1cm and a maximal thickness of 0,5 cm.
- two M3 x 20mm Screws with a Socket head
- one M3 x 40mm Screw with a Socket head - it has to be magnetic
Inspired by the Prusa Printer i made the magnetic clasp adjustable by using a magnetic M3 x 40 mm screw. It's inserted into the bottom hole and the magnetic force s increased by tightening the screw.
No Supports are needed if your printer is tuned well.
Because of the already embedded Screw holes it's not re sizeable - for this check out the older Design.