Balatro Joker - Mime - Hueforge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fanart of the Mime Joker card from the videogame Balatro, made with Hueforge
- Rating
- 5 / 5
- Likes
- 26
- Downloads
- 83
- Makes
- 1
- Views
- 832
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 67.26x90mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.6
PLA BambuLab Matte Scarlet Red Transmission Distance: 2
PLA BambuLab Matte Ash Gray Transmission Distance: 1.5
PLA BambuLab Matte Ivory White Transmission Distance: 3.5
This print uses 4 unique filaments
Swap Instructions:
Start with Charcoal
At layer #14 (1.2mm) swap to Scarlet Red
At layer #18 (1.52mm) swap to Ash Gray
At layer #24 (2mm) swap to Ivory White for the rest.