1 / 2
Spool Mount for the Peopoly Magneto X
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Spool Mount for the Peopoly Magneto X
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 22
- Makes
- 0
- Views
- 148
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Public Domain
This is an alternate spool mount for the Peopoly Magneto X 3d printer.
I did not like the stock mount that came with the printer. I thought it was too flimsy and I had some spools fall off while printing. So, I designed this sturdy spool mount
This mount uses the existing threaded holes on the left hand side rail.
I used M4x12 and M3x16 screws to attach this to the printer.
You may want to add some very light grease or dry lube to the sleeves that go over the rollers. Then attach the roller end caps with glue.