Playmobil blink light Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple adapter piece to use a bigger Playmobil Light on this very small car it is not intended for
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 16
- Makes
- 0
- Views
- 196
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles
- License
- Creative Commons — Attribution — Share Alike
Little adapter to use the blinky lights of the bigger playmobil cars on the smallest. The orientation on the car is chosen to be able to open the trunk and the top cover.
The model contains built-in supports in order to be printed upright. You need to cut of the support once you are done printing. You will need a normal (tree) support for the other horizontal overhangs/cantilevers.
This print orientation was chosen to change the colors according to the colors of the blinking light. There is a little recess on the inside that indicates the layer where the colors need to be changed in the slicer.
All above information (orientation, supports, color changes) can be found in the attached (bambu-Slicer) 3mf file.