Artillery Bed automatic Level Sensor Adapter 1 & 2 mm and parametric Fusion File for more offsets
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Artillery Bed Automatic Level Sensor Adapter with parametric Fusion File for more offsets. Ensure proper sensor position
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 12
- Makes
- 0
- Views
- 79
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Introducing the Artillery Bed Automatic Level Sensor Adapter with 1 & 2mm offsets, and a parametric Fusion File for additional adjustments.
This design is tailored for parametric use, allowing simple parameter changes to achieve the desired offset. It's essential when altering nozzle lengths to ensure the bed level sensor aligns correctly. Otherwise, the sensor may protrude too far, risking breakage or failure to trigger, potentially leading to a nozzle-bed collision.
I recommend testing with a piece of plastic between the nozzle and the bed to prevent any damage in case of a crash. Note that the trigger also needs to be in contact with the plastic piece; both the nozzle and sensor should be spaced the same amount from the bed while testing.
printed with:
- layer height 0.15
- 0.4 mm Nozzle