BigTreeTech (BTT) Eddy probe for Diamond Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is the BigTreeTech Eddy probe mount for the TwoTrees Sapphire Plus (SP-5) and Sapphire Pro (SP-3).
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 86
- Makes
- 0
- Views
- 1,140
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Public Domain
This is the BigTreeTech Eddy probe mount for the TwoTrees Sapphire Plus (SP-5) and Sapphire Pro (SP-3). The original Diamond Mount doesn't include this probe mount. Please follow the material print guidelines for the Diamond Mount specified in the original instructions.
I am using the V6 Bambu hotend, but this should work with any standard hotend that fits the Diamond Mount.
You will need supports when printing, I have supplied pictures of where I used them.
You will need this in your startup macro to set the height at what you need. The best way I have found to do this is to do a test print and live adjust Z to the height you need and then take that number and plug it into this line and it will set it for you at the beginning of every print.
SET_GCODE_OFFSET Z=-0.xx MOVE=1
You will have to set this for every sheet that you use. Mine is different between even the springsteel side and PEI side of the same sheet. I comment out the other sheets.
===example===
#SET_GCODE_OFFSET Z=-0.26 MOVE=1 #PEI Side
#SET_GCODE_OFFSET Z=-0.5 MOVE=1 #Steel Side
SET_GCODE_OFFSET Z=0.2 MOVE=1 #Dobstfy Sticker Plate
===example===
Diamond Mount
https://www.printables.com/model/169465-the-diamond-mount