Stand for USGS Geiger Counter Item No CDV-717
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A custom stand for a USGS Model 1 Item CDV-717 Geiger counter
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 32
- Makes
- 0
- Views
- 263
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial
This is a stand for my USGS Model 1 Item CDV-717 Geiger counter, found at a vintage shop long ago. It stands at an 11-degree back angle, and has room for the latches that would otherwise prevent it from standing upright for display.
OpenSCAD included for mostly educational purposes. If you have this model, this should work.
After printing, I added some thin adhesive foam to the bottom of the print, as well as inside where painted surfaces contact the item itself.
If you are not sure if your item will fit, use the two test STLs first, and adjust the SCAD code as needed.