Geometric Sculpture #02
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A geometric sculpture, easy to print and easy to plug the parts together.
- Rating
- 5 / 5
- Likes
- 333
- Downloads
- 714
- Makes
- 2
- Views
- 4,966
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Sculptures
- License
- Creative Commons — Attribution — Noncommercial
Object description:
Geometric sculpture no. 02.
Print the parts in the suggested direction. If required, paint on support is already defined, also modifiers for infill and perimeters.
The parts can be simply plugged together. Glue is not required but can be used.
This sculpture is provided in three versions:
- mono: without pattern, for single extruder
- groove: with pattern, for single extruder
- multi colour: for MMU, AMS, Toolchanger…
Number of parts to be printed:
1x Sculpture-#02-corner_bottom
2x Sculpture-#02-corner
3x Sculpture-#02-curve_mirrored
1x one of the different base types
If you choose one of the versions with the bore hole, you need a pin of dia. 8mm. 53mm long for the square base and 70mm long for the triangle base.
The mounting hole in the corner part will not be perfectly round. I therefore recommend carefully reworking the hole by hand with a drill.
In addition, stands with different pin diameters from 8.0 to 7.7 mm are now available. For a perfect fit, I recommend a small test print of the pin before printing the complete stand.
Assembly instructions:
See file “Assembly instructions - Sculpture #02.pdf” in the download section “other documents”.
Links to the other sculptures of this series:
| Geometric Sculpture #01: |  | Link |
| Geometric Sculpture #03: |  | Link |
| Geometric Sculpture #04: |  | Link |
| Geometric Sculpture #05: |  | Link |
| Geometric Sculpture #06: |  | Link |
| Geometric Sculpture #07: |  | Link |
| Geometric Sculpture #08: |  | Link |
| Geometric Sculpture #09: |  | Link |
| Geometric Sculpture #10: |  | Link |
| Geometric Sculpture #11: |  | Link |
| Geometric Sculpture #12: |  | Link |
| Geometric Sculpture #13: |  | Link |
| Geometric Sculpture #14: |  | Link |
| Geometric Sculpture #15: |  | Link |
| more will follow… | … |
Update 2024-11-19:
Crosslinks to sculpture #13, #14 and #15 added.
Update 2024-08-21:
Crosslinks to sculpture #11 and #12 added. Bottom parts replaced. After checking based on the comment left by DCI Murdoc, I realised that these parts actually had the wrong bore diameter. I apologise if anyone has already printed a mismatched part.
Update 2024-07-22:
Crosslinks to sculpture #06 to #10 added.
Update 2024-07-18:
Document “Assembly instructions - Sculpture #02.pdf” added to the download section.
Update 2024-07-15:
Base_square_pin versions with dia. 7.9/7.8 and 7.7mm pin diameter and corresponding comment in the description added.
Update 2024-07-07:
Both Base_square versions have been updated because chamfers were partly missing.
Recommended print settings:
Material: PLA, ASA/ABS, PETG.
Resolution: 0,2mm
Infill: 5%
Perimeter: 2
Support: already included where required