1 / 3
Tube Holder and Drainer for Mityvac 7201 Fluid Evacuator — image 1
1 / 3

Tube Holder and Drainer for Mityvac 7201 Fluid Evacuator

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Using a fluid extractor for oil changes makes the chore very easy. The drawback is that you're left with the unruly…

Rating
0 / 5
Likes
3
Downloads
21
Makes
0
Views
209
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial

Using a fluid extractor for oil changes makes the chore very easy. The drawback is that you're left with the unruly plastic tubes coated on the inside with oil.

These brackets fit over a 2x4 exposed stud and are secured with a single screw. I printed in ABS out of concern that the garage gets hot in the summer.

The slotted bracket holds the tubes firmly at the top - print two to accommodate different tube lengths, or more if you want to keep the tubes more straight.

The loop bracket holds all the unruly tubes straight - print a few of these.

With the tubes now vertical and under control, put their ends in a container to catch the drained oil. Leave them there until your next oil change.

Print Settings

Printer Brand:

Prusa

Printer:

I3 MK3S

Rafts:

No

Supports:

No

Resolution:

0.3mm

Infill:

100%

Filament: Inland ABS

Category: Tool Holders & Boxes

Tags