Parametric Soehnle kitchen scale platter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I have a Soehnle kitchen scale which has a glass platter on top which is glued to a adaptor which is screwed into the…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 13
- Makes
- 0
- Views
- 88
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- BSD License
I have a Soehnle kitchen scale which has a glass platter on top which is glued to a adaptor which is screwed into the base. The glass detached from the adaptor and after failed attempts of gluing it back on with superglue and epoxy, which both didn't last very long, I designed a replacement for the whole glass plate.
It just snaps onto the adaptor with little force but is held strong enough to not detach on it's own. The design is parametric so if it's too lose or snug for your scale, try playing around with the holder_diameter and holder_overhang parameters.
Thingiverse
https://www.thingiverse.com/thing:6528263
GitHub
https://github.com/nomike/parametric-soehnle-kitchen-scale-platter
Instructions
As it will come in contact with fluids I recommend printing this in PETG.
Supports are not needed. Perimeter and infill don't matter.
Category: Other