Garmin Fenix 5x Plus charging stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A modular stand to charge a Garmin Fenix 5x Plus watch
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 47
- Makes
- 1
- Views
- 574
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Public Domain
A modular stand for a Garmin Fenix 5x Plus.
I made this stand to charge my old 5x more reliably.
The stand has three parts:
- A cradle - the round piece at the top where watch is placed. It has a hole to put the charging cable through.
- A bracket - holds the cradle and connects it to the base
- A base - well, a thing standing on the desk :)
All parts are connected using the hexagonal socket.
Watch position
The design won't work well for people wearing the watch on the right hand, as the bracket will cover the charging slot unless you are OK with placing the watch upside-down. The model includes the bracket-33-right-hand part for this case. When printing, pick one of the brackets that suits you.
Printing parameters
The stand on the photo was printed using PLA.
- Layer height: 0.2mm.
- Wall loops: 3
- Infill density: 15%
The watch isn't heavy, so the strength of the components is not an issue.
Customisations
I included the Fusion360 file with all the components and some additional variants. The file is a work in progress, so it's a bit messy. I'll rework and document it later.
You might want to change the socket tolerance when the fit is too tight or too loose. Change the socket_tolerance parameter to a value that works for you. The tolerance for published parts is 0.1mm.
