1 / 4
Anycubic Vyper cable harness guide
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Anycubic Vyper version A: Cable guide and bowden tube stress relief
- Rating
- 3 / 5
- Likes
- 2
- Downloads
- 48
- Makes
- 1
- Views
- 658
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Anycubic Parts & Upgrades
- License
- Creative Commons — Attribution
The idea is to guide the printhead cable harness while minimising stress and weigth.
I chose to pass the harness under the extruder carriage to straigthen it from the printhead, and hide it a bit.
The printhead cable guide also stress relief the bowden tube.
Printing
The x-carriage cable guide does not require supports.
The extruder cable guide requires supports for the internal lip.
Assembly
X-carriage
- Free the cable from its actual fixture.
- Slide the part in place while cliping the bowden tube.
- You can secure it with a zip tie in the front holes.
- Slide 2 zip ties by the back vertical holes.
You may have to untangle the cable harness to have a straight ribbon later, so do not tie them down immediatly.
Unplug it from the printhead if necessary.
Extruder
- Unscrew the filament runout sensor 1st screw.
- Unplug the extuder's motor.
- Pass the cable harness under the extruder carriage.
- Slide the part in position.
- Adjust the harness position and put 2 zip ties.
Make sure to have enough length to slide the printhead all the way. - Put the screw back in place.
- Plug the motor back.