1 / 2
E 6000 Glue Adhesive Tip
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Here are a few applicator tips for an E6000, 3.7 oz tube of adhesive.
- Rating
- 4.5 / 5
- Likes
- 111
- Downloads
- 292
- Makes
- 2
- Views
- 959
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Here are a couple of tips for an E6000, 3.7 oz tube of adhesive. Fine has a 1.5mm tip, Small is 1.8mm, Medium is 2.0mm and Wide is about 4.3mm.
No supports, raft, or brims
2.0mm
PLA
15% infill
Rotate the part 90 degrees, then use the “rear seams” for best results.
For the fine tip, I use a round toothpick to plug the hole between jobs( just the tip fits in). The small and medium tips can use a scrap of filament, for the standard tip, a pencil or nail can be used, again, just the tip!
For long-term storage, the tips should be removed.