Kurbel für Fräslift / Openlift
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Eine Kurbel für den Openlift von Nachdenksport
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 109
- Makes
- 0
- Views
- 549
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
English below:
---------------------------------------------------------------------------------------------------------------
Update: Ich habe eine zweite Version der Kurbel (V2) hochgeladen, die 5mm kürzer ist. Es hat sich herausgestellt, dass die erste Variante beim Fräserwechsel bei großen Fräsern angestoßen ist.
---------------------------------------------------------------------------------------------------------------
Ich habe mir den Openlift von Nachdenksport gebaut.
Der macht mir so viel Freude, er ist sehr präzise und leichtgängig.
Dem wird meiner Meinung nach die originale Kurbel nicht gerecht.
Deshalb habe ich eine eigene Kurbel gezeichnet und gedruckt.
Sie passt auch für andere Router-Lifter mit 5mm Inbus.
Zusätzlich zu den 3D-Druck-Teilen benötigt man folgende Komponenten:
Inbus-Bit 5mm
Inbus-Schraube M6x16
Mutter M6
Unterlegscheibe M6
optional: 2 Kugellager 6x10x3
Gedruckt mit PETG, 0,2mm Schichthöhe, Infill mindestens 15%.
Ich habe die Teile so konstruiert, dass sowohl das Bit als auch die Kugellager stramm sitzen. Wem das zu eng ist, der sollte 1-2% größer drucken.
---------------------------------------------------------------------------------------------------------------
Update: I have uploaded a second version of the crank (V2) that is 5mm shorter. It turned out that the first variant was triggered when changing the cutter with large cutters.
-------------------------------------------------- -------------------------------------------------------------I built the Openlift from Nachdenksport.
I enjoy it so much, it is very precise and smooth.
In my opinion, the original crank doesn't do justice to this. That's why I drew and printed my own crank.
It also fits other router lifters with a 5mm Allen key.
In addition to the 3D printed parts, you need the following components:
Inbus bit 5mm
Inbus screw M6x16
Nut M6
Washer M6
optional: 2 ball bearings 6x10x3
Printed with PETG, 0.2mm layer height, infill at least 15%.
I designed the parts so that both the bit and the ball bearings fit tightly. @If that's too narrow for you, you should print 1-2% larger.
#openlift
#nachdenksport