Krinner Christmas Tree Stand Locking Pin
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement locking pin for the Krinner Large Christmas Tree Stand.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 12
- Makes
- 0
- Views
- 102
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Winter & Christmas & New Year's
- License
- Creative Commons — Attribution — Noncommercial
Last Christmas, the locking pin on my large Krinner Christmas tree stand broke. This is a simple replacement with the same basic dimensions. You'll need to use Prusa Slicer to cut one of the ends off (at 5.20mm) and insert a joining pin at the cut. The pin fit tight enough that I didn't bother gluing it. In fact, I broke the pin trying to take it back apart, so friction fit is probably fine, but you can glue it if it comes apart.
I printed it with 0.2mm layer height, 15% grid infill (default) using PETG. I created a height modifier (5.20mm and up) to set the infill to 100% / rectilinear to force the main shaft and pin to be printed solid. Not sure that's really necessary. The pin is just there to prevent upward pressure on the handle from releasing the tree clamps.