1 / 5
Cisco Aironet 1140 Series Access Point stand - LAP1142
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cisco Aironet 1140 Series Access Point stand
- Rating
- 5 / 5
- Likes
- 3
- Downloads
- 36
- Makes
- 2
- Views
- 398
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Public Domain
Hi,
I made stand for Cisco Aironet 1140 Series.
I use the stand for better cooling. The stand can be placed on the grid of a 12 cm fan. In my case, the stand prevents the fan grill on the rack from being covered and guarantees excellent air flow.
How to print:
Use PETG or ABS (PLA is not good because of low melting point).
0.2 layer, 15% infill is OK.
There are two versions of legs:
- 1142_Leg - no nuts needed, just print and use M4 screws
- 1142_Leg_MoldingNut - Use 4x molding nuts M4x4x6 to M4x8x6
To assemble the stand you will need 4x M4 screws DIN 965 lengths M4x25 - M4x35




Happy printing