Large Diameter Beam Compass
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€3.66 – €4.47 net (excluding VAT)
For file: 2d.2A-Tracer (1) (1)_0.4n_0.2mm_PLA_MK4_4h12m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €4.06 excluding VAT (range midpoint).
- Weight reported by the author
- 48 g
- Print time reported by the author
- 4.2 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Employ 3/4" scrap wood to make a very large compass, as large as you can handle. Use X-acto knife to cut a large circle
- Rating
- 3 / 5
- Likes
- 6
- Downloads
- 60
- Makes
- 0
- Views
- 479
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
Two sliders can be attached to any length 5/8" to ¾" thick wood beam to allow drawing or cutting a circle. If you prefer not to use a wood scrap, you can print the beam consisting of multiple beam extensions that press fit together.
The center pinpoint is offset from the center so that you can turn it and make ~¼" adjustment in the diameter by turning the pin.
PLA bolts secure the sliders, center pin, pencil, and beam together.
The PLA beams are optional.