Emoji Box - configurable!
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Have a rounded emoji box for your stuff - now the box itself shows what's inside!
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 34
- Makes
- 0
- Views
- 156
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Have a rounded emoji box for your stuff - now the box itself says what's inside!
Customizing
Use OpenSCAD or the makerworld customizer to adapt the emoji and sizes as needed!
Multicolor model
Create with type set to:
- “both”, and save as xxx_both.STL
- “sunken_text_only”, and save as xxx_textonly.STL
Then load both “xxx_both.STL” and “xxx_textonly.STL” into your Slicer and combine them into a single object. Then color the two parts as you want.
Have fun!
Printing
You can print the box without supports:
Note that the wiggle room between the top lid and the bottom container is by default very small. If your printer is not well calibrated, increase this value to e.g. .3mm, so the lid fits on the bottom container.