Ceiling mount fishing rod rack
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a simple fishing rod holder designed to mount on a ceiling or under another horizontal surface.
- Rating
- 5 / 5
- Likes
- 29
- Downloads
- 245
- Makes
- 1
- Views
- 1,910
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
Simple 4 fishing rod holder with 2 main parts. The open part of the rack features tabs at either end for hooking a bungee cord to retain the rods. I've included screw holes with passthrough holes for a screwdriver.
Each part is broken into 2 bodies to fit on an average print plate. I would print these with at least 4+ perimeters and top/bottom layers. I use a 0.8 nozzle, so I only did 4 and 15% infill, but you can increase that for strength.
Recommend PETG/ABS for strength. Print flat without supports. The ends might require small rafts depending on your printer bed.