HueForge Step Test Square - 0.04mm steps
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
For determining a filament's TD value
- Rating
- 5 / 5
- Likes
- 4
- Downloads
- 174
- Makes
- 1
- Views
- 530
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This 20x30mm swatch is designed to be used with HueForge settings of:
Step Height: 0.04mm
Layer Height: 0.04mm
Base Layer 0.16mm
Your slicer needs to be set for:
Layer Height: 0.04mm
First layer height: 0.16mm
Perimeters: 1
Infill: 100%
Teaching Tech has a video which details the process of using the original Step Test model at around 13:27. However for this model, set the slider to 1.00mm for the Black, instead of 1.04mm, then set the other color to the maximum height. Your filament change height should also reflect the 1.00mm instead of 1.04mm
https://www.youtube.com/watch?v=ua3DoRlmN-c&t=33s