Warco WM250V metric Lathe threading dial gear (30 tooth)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A replacement gear for the threading dial for a Warco Lathe to machine different pitch threads eg. 1.25mm
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 26
- Makes
- 0
- Views
- 484
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
The WM250V metric comes with a 48 tooth gear on the threading dial. Changing this to a 30 tooth gear adds the ability for the threading dial to be used with 1.25mm and 2.5mm thread pitches without taking any away.
I used it for a 1.25mm thread I had to make and it worked well.
I used the Helical Gear Generator extension by Ross Korsky in Autodesk Fusion.
I got the charts from https://www.cgtk.co.uk/metalwork/calculators/threaddialindicator
It's a really good tool. The following settings are for the WM250V with the original 48 tooth gear:

and for the 3D printed 30 tooth gear:

I considered creating a new dial face with only 6 lines instead of 12 since only 6 are used but the original still works well.
Printing and installation
With the new gear, the original 17mm (M10) nut fouled the leadscrew so I replaced it with a 14mm printed one.
I had to file 4mm or so off the threading dial body so it clears the leadscrew with the smaller gear.
I printed the gear in nylon (Taulman Bridge) so that it wouldn't wear and create dust but another material would probably work.