1 / 2
DBZ - Son Gohan Teen Kamehameha - HueForge
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Dragon Ball Z - Son Gohan Teen Kamehameha. Made with Hueforge, PrusaSlicer version
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 58
- Makes
- 0
- Views
- 383
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial
Here is the PrusaSlicer version I used on my Prusa MK4 with MMU3. You can use the recommended 3MF or STL with the manual print instructions below.
Manual print instructions
You can change the size of the X and Y axes, but DO NOT change the Z axis.
Print at:
- Infill: 100%
- Layer height: 0.08mm
- First layer height: 0.16mm
- Ironing: 15%
Filaments Used:
- Polymaker PolyTerra PLA+ Black
- Overture PLA+ Blue
- Polymaker PolyTerra PLA Sapphire Blue (Ice Blue)
- Polymaker PolyTerra PLA Cotton White
Swap Instructions:
- Start with Black
- At layer #14 (1.2mm) swap to Blue
- At layer #21 (1.76mm) swap to Ice Blue
- At layer #25 (2.08mm) swap to Jade White for the rest.
