1 / 1
DBZ - Goku portrait - HueForge
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Dragon Ball Z - Goku portrait - Hueforge, PrusaSlicer version
- Rating
- 0 / 5
- Likes
- 24
- Downloads
- 101
- Makes
- 1
- Views
- 521
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution
Here is the PrusaSlicer version I used on my Prusa MK4 with MMU3. You can use the recommended 3MF or STL with the manual print instructions below.
Manual print instructions
Print at:
- 100% infill
- Layer height: 0.08mm
- First layer height: 0.4mm
- Ironing: 15%
Filaments Used:
- Polymaker PolyTerra PLA+ Black
- Polymaker PolyTerra PLA+ Red
- Prusament Orange
- Polymaker PolyTerra PLA Cotton White
Swap Instructions:
- Start with Black
- At layer #6 (0.8mm) swap to Red
- At layer #10 (1.12mm) swap to Orange
- At layer #13 (1.36mm) swap to White for the rest.