1 / 2
IKEA SKADIS AIRSOFT GUN RACK - RIFLES — image 1
1 / 2

IKEA SKADIS AIRSOFT GUN RACK - RIFLES

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A Airsoft Gun Rack System Based Around the Ikea Skadis Ecosystem

Rating
5 / 5
Likes
190
Downloads
614
Makes
3
Views
5,596
Reviews
3

Updated at source:

Model information

Category
Organizers
License
Creative Commons — Attribution

these gun racks are sized to some of the guns i have, a Novritsch SSG96, Krytac Vector, and Double Bell Mk18, the square brackets come in two varieties, 50mm, and 65mm for stocks and more square handguards, and for the rounded brackets they come in 30 and 45mm sizes to accommodate buffer tubes, barrels and tracer units/suppressors, the fixings are my own variation of T bolt, they are tapered with a flat shoulder to allow for a much tighter fit, i have given two choices of those too, in normal fit and relaxed fit sizes, relaxed fit may have a little too much give to it

in order to install them you must insert the T bolt through the hole of the part (i recommend filing down any leftover support material and drooped overhangs) and insert your part through the skadis board, then simply twist the T bolt with either a pair of pliers or the included tool, first being sure it is correctly seated, if you do accidentally bend, twist or snap the T bolt, you may want to try the relaxed fit variant, once both T bolts are fastened, check that it can support a load (i recommend more rigid, inflexible filaments such as ABS and ASA)

if you have any questions, queries or suggestions for parts for this system, please leave a comment below, i am going to be making a new collection soon for pistols and magwells, so please follow if you wish to be kept up to date

 

all parts were printed out of Bambulabs' glass filled ABS, with all parts laid on their side, such that the T bolts are horizontal to give maximum strength to the holder

Tags