Compact weekly Pill Box
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Compartment divider for "HEIDEL Smartphone Box" with sliding lid; 3x7, 2x7, 3x5 or 2x5 compartments
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 14
- Makes
- 0
- Views
- 638
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
The size of the box is 118 x 53 x 9 mm; height inside = 7 mm
Depending on your needs you can choose between 2 or 3 compartments per day.
If you need larger compartments you can use the “5 day” version.
The prototypes are printed on a Satin Steel Sheet with layer height 0.3 mm and seam position random using PETG filament. During assembly the short legs must be bent so that they fit into the guide groove of the box. Therefore a filament with good flexibility should be used.
Print time on Prusa i3 MK3S+ is between 9 and 16 minutes.
The test prints worked well without additional structures but the walls are very narrow and not all combinations of sheets and filament types may work. If there are adhesion problems the “PB_nxm_pads.stl” variants should be used. The additional pads can be easily removed with a sturdy blade knife.
For a perfect finish, a disposable nail file or medium-grit sandpaper glued to an ice cream handle can be used.
The “HEIDEL Smartphone Box” (including 30g chocolate) can be purchased on site at Mueller drugstore (Drogeriemarkt Müller) or online
https://www.mueller.de/p/heidel-smartphone-612851/
It is also available from
https://www.worldofsweets.de/Heidel-Smartphone-30g.316630.html
and others
A box with the same dimensions is available with the design “EURO-Banknote” or “Gold-Kreditkarte”. I have not tested them for 100% compatibility.